Shutting Off Your House's Main Water Supply: Quick Steps
Shutting Off Your House's Main Water Supply: Quick Steps
Blog Article
The article author is making several great pointers on the subject of How to Turn Off the Water in an Emergency in general in this article following next.
If you try to close the water off to your fixtures by using an angle quit and that doesn't function you will need to shut of the water pipe to make your repair. There are likewise several other factors you could need to shut the water pipe like repairing frozen pipelines, repairing leakages, replacing fixtures or taps.
Many people are not aware that they even have a water pipe valve right in their own residence and simply call a plumber of never end up doing the repair service till things obtain truly poor since they simply do not know that closing the water pipe is really very easy.
One of the most common areas a water main will be located in house is in your boiler room, basement, or a removed panel in an area for your house.
As soon as you find the water main you will simply transform the valve clockwise to shut all the water off in your house till you have actually finished the fixing. Some homes will certainly have a ball valve with a bar that you can pull rather than look to close the water off.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
Do you like reading up on How to Turn off the Water for Plumbing Repairs? Put a comment directly below. We would be pleased to find out your insights about this entry. We hope that you visit us again soon. Make sure you take the time to promote this entry if you appreciated it. We love reading our article about How to Turn Off the Water in an Emergency.
Maintain plumbing health; connect today. Report this page